In a prior article we focused on the main items to look out for when buying LED Strip Lights for the first time. Now we are going to take you through the next phase; installation. Installing your LED Strips could be anything from quite simple to very difficult, but ultimately it all depends on what final result you are attempting to achieve with your lighting system. For instance, introducing a 1 metre strip of LED lighting into your kitchen cabinet may be a many more self-explanatory than using 20 metres of RGB LED Strip Lights to outfit a team and run this on DMX Control. Regardless of what you do there are certainly a few universal items to look out for and this information will take you through a number of them.
We shall start with the LED Tape itself. This is made up of long bit of high impact, flexible circuit board with surface mounted devices, or SMDs, positioned along its length. There are a few different items to consider here including, LEDs per metre led strip lights uk, LED chip size, strip light colour and length. Strip Lights are available in two LED per metre varieties, 30 LED per metre and 60 LED per metre. As suggested by the name the latter has two times as many LEDs and is brighter compared to former. They are made to be found in a lighting context where they are forced to contend with background illumination. So for instance if you want to use them in a daylight setting, such as a shop street display, or add them to an area that already has general illumination and still want them to be observed, you must opt for 60 LED per metre as their sharper light output makes them suited to these purposes. Aside from this a 30 LED per metre strip will be able to deal with most other lighting arrangements, such as club setups, or elsewhere they don’t have to contend with background lighting.
Whenever you go through the specifications of strip lighting you will usually notice a series of four numbers that to the majority of people mightn’t mean a lot. These actually refer to how big is the average person LEDs on the strips. Typically you will discover chip sizes of either 5050 (5mm by 5mm) or 3528 (3.5mm by 2.8mm). The important thing difference between both of these forms of chip size may be the consistency of light they produce. Smaller LEDs will generate an even more jagged and inconsistent effect, while larger LEDs will provide an even more even spread of light.
Another decision to produce is strictly what colour strip light you want to buy. They are usually available in three main colour varieties, including warm and cool white and interchangeable RGB. The former two are for adding stylish ambient lighting to commercial and domestic settings while avoiding being too garish with the finish result. They can be utilized to aesthetically to enhance the look of an area with the addition of layered or accent lighting, or they are able to add functionality to kitchens, bathrooms or offices where they can be utilized as task lighting to aid work. RGB LED is a direct substitute for old fashioned disco lighting and offers thousands of programmable effects. Typically they will run directly from a handy remote control which works in conjunction with a red eye sensor attached between the strip light and transformer. However, DMX Control is also an option. This can be a type of advanced effects programming that uses an industry standard signal to manage the brightness, colour and frequency of the lights.
The absolute most obvious consideration to produce is the precise period of strip lighting that you require. This is dependent upon the nature of your setup and how complex your intentions are. Usually most lighting arrangements can be achieved with just one strip. Strip Lights are available in 5 metre and 10 metre reels as standard, but longer or shorter bespoke lengths could be ordered so call your provider to find out. Lengthening or shortening strip lighting can be done all by yourself as well. To shorten a strip light can be done by simply cutting the strip at among its cutting points spaced approximately 5cm apart along the size of the light. To install two pieces of strip together, and thereby increase the size of the light, you will be needing a soldering iron and some two core wire. Simply solder these wires to their respective plus and minus solder points at the conclusion of the strip light where in actuality the cut has been made and do the exact same on one other strip to complete the connection. This technique can be utilized to reach a little extra length, particularly when trailing them around a sizable corner.
This article has given you a several main specifications connected with LED Strip Lighting and how to make certain you obtain the right light you need for your purposes. Be aware of additional articles on the best way to ensure you meet the power requirements of your lighting system.